Loading ...
Loading ...
Loading ...
Activating/deactivating SabbathMode
u
To activate this function, swipe the display until you
reach Settings and press for 1 second. The menu
shows the available settings.
u
Swipe the display until the symbol for SabbathMode
(Menora) appears. Press the symbol for 3 seconds.
w
The display changes color.
w
SabbathMode has been activated.
To deactivate the function, press the display for 3
seconds.
SabbathMode has been deactivated.
TubeClean
This setting cleans the IceMaker pipes.
Make sure that the following requirements are met:
q
IceMaker cleaning process is ready
(see 8.2.5 Cleaning the IceMaker) .
Activate setting
u
Activate the setting in the customer menu
(see 6.2 Operating logic) .
w
TubeClean is prepared (max. 60 min.): The symbol
flashes.
w
Water pipes are rinsed: Symbol flashes.
w
Rinsing process is complete: Function turns off auto-
matically.
Ice cubes
With this setting, you can choose the ice cube size.
Choosing the setting
u
Make your settings in the Customer menu
(see 6.2 Operating logic) .
Reminder
Reminders are displayed acoustically by a beep and visu-
ally by a symbol in the display. The signal gets louder until
the alert stops.
Insert IceMaker drawer
This message appears when the IceMaker drawer is
open.
u
Push in IceMaker drawer.
w
The message disappears.
w
The IceMaker makes ice cubes.
Activate setting
u
Activating/deactivating (see 6.2 Operating logic) .
Reset
This function resets all settings to the factory settings. All
settings that you have made thus far will be reset to their
original values.
Activate the setting
u
Activating (see 6.2 Operating logic) .
Turn off appliance
This setting turns off the whole appliance.
Switch off whole appliance
Fig. 11
u
Turning off the IceMaker .
u
Activating/deactivating (see 6.2 Operating logic) .
w
Off: Display turns black.
6.5 Warnings
Warnings are issued with an acoustic signal and visually
with a symbol on the display. The signal gets louder until
the alert stops.
6.5.1 Message
Close door
This message appears if the door is open too long.
You can set the time before this message appears .
u
Stop alarm: Confirm the message.
-or-
u
Close the door.
Power failure.
This message appears if the freezer temperature rises
after a power outage. When the power outage is over, the
appliance will continue to operate at the last temperature
setting.
u
Stop alarm: Confirm the message.
w
Temperature alarm appears (see Temperature alarm) .
Use
14 * Depending on model and options
Loading ...
Loading ...
Loading ...