Loading ...
Loading ...
Loading ...
The pull-out board with IceTower is mounted on a glass
shelf with pull-out rails. You can dismantle the pull-out
board for cleaning.
7.2.1 Dismantling the pull-out board with
IceTower
Removing the container
Fig. 23
u
Remove the pull-out board.
u
Lift the container
Fig. 23 (5)
at the front.
u
Remove the container.
Fig. 24
u
Remove the hang-on tray
Fig. 24 (6)
.
u
If there are ice cubes in the hang-on tray: Empty the
hang-on tray.
w
The container and hang-on tray have been removed
and you can clean them. (see 8.2.4 Cleaning the equip-
ment)
Removing the pull-out board
Make sure that the following requirements are fulfilled:
q
Containers have been removed. (see 7.2.1.1 Removing
the container)
Fig. 25
u
Slide in the pull-out board.
Fig. 25 (7)
u
Lift the pull-out board at the front left.
Fig. 25 (8)
u
Lift the pull-out board at the front right.
Fig. 25 (9)
w
The pull-out board is detached from the attachment at
the front.
u
Take out the pull-out board to the front.
Fig. 25 (10)
w
The pull-out board has been removed and you can
clean it. (see 8.2.4 Cleaning the equipment)
7.2.2 Inserting the pull-out board with
IceTower
Inserting the pull-out board
Fig. 26
u
Slide the rails in.
Fig. 27
u
Place the pull-out board in at an angle behind the front
lug.
u
Slide it in at an angle. Make sure that the stop is behind
the lug on both sides.
Fig. 27 (11)
u
Lower the pull-out board at the front.
Fig. 27 (12)
Fig. 28
u
Push the pull-out board down at the front.
w
The pull-out board clicks into place.
Equipment
* Depending on model and options 17
Loading ...
Loading ...
Loading ...