Loading ...
Loading ...
Loading ...
6-53
06
Calibrating the Battery Sensor
If the AGM battery is reconnected or
replaced, ISG system will not operate
immediately. If you want to use the
system, the battery sensor needs to
be calibrated following the below
procedure.
ORS061023L
A
: Battery sensor
1. Turn off the engine.
2. Disconnect all electronic devices
that were additionally installed after
the vehicle was delivered, such as
navigation, dashcam, etc.
3. After 4 hours with the engine off, turn
the engine on and off 3 to 4 times.
Information
The ISG system may not operate in the
following situations.
- There is a malfunction with the ISG
system.
- The battery is weak.
- The brake vacuum pressure is low.
If this occurs, have the ISG system
checked by an authorized retailer of
Genesis Branded products.
NOTICE
ȉ Use only a genuine Genesis ISG
battery for replacement. If not,
the ISG system may not properly
operate.
ȉ Do not recharge the ISG battery with
a general battery charger. It may
damage or explode the ISG battery.
ȉ Do not remove the battery cap. The
battery electrolyte, which is harmful
to the human body, may leak out.
Loading ...
Loading ...
Loading ...