Loading ...
Loading ...
Loading ...
6-13
06
Automatic gear shift to P (Park)
The gear is shifted to P (Park)
automatically for safety reasons under
the following conditions:
- When the engine is turned off with
the gear in R (Reverse), D (Drive) or N
(Neutral).
- When the driver’s door is opened
with the engine running, the gear in R
(Reverse), D (Drive) or N (Neutral), the
seat belt unfastened and the vehicle
at a standstill.
- When the driver’s or front passenger’s
door is opened with the gear in N
(Neutral) and the vehicle is turned off.
In situations in which the gear must
be in P (Park), always check if the gear
is shifted to P (Park) by checking the
cluster.
R (Reverse)
Use this position to drive the vehicle
rearward.
ORS061005
To shift the gear to R (Reverse), rotate
the shift dial counterclockwise while
depressing the brake pedal.
The dial will vibrate each time it is
shifted to R (Reverse). It is to prevent
incorrect dial shift or to notify the
driver the dialshift is in the R (Reverse)
position.
When the vehicle is stopped in the
R (Reverse) position, if you open
the driver's door with the seat belt
unfastened, the gear will automatically
shift to P (Park).
However, if the vehicle is in motion, the
gear may not automatically shift to P
(Park) to prevent automatic transmission
damage.
NOTICE
Always come to a complete stop before
shifting into or out of R (Reverse); you
may damage the transmission if you
shift into R (Reverse) while the vehicle is
in motion.
Loading ...
Loading ...
Loading ...