Loading ...
Loading ...
Loading ...
Problem Cause Action
The display does not come on
when the power switch is set to
"1".
The battery is not charged. Charge the battery.
Blown 5 A fuse. Change the fuse.
The vehicle control unit (VCU) or
its connections are defective.
Speak to an approved service workshop.
The power switch is defective.
The control panel is broken.
All LED lights on the display are
flashing slow in sync.
The vehicle control unit (VCU) or
its connections are defective.
Speak to an approved service workshop.
All LED lights on the display has
a solid light for more than 3 sec-
onds.
Defective internal connection be-
tween the control units in the
product.
Speak to an approved service workshop.
The cutting deck motors does not
start.
The 2 cables to the cutting deck
are not connected correctly.
Connect the cutting deck to the product, refer
to
To attach the cutting deck on page 15
.
The cutting deck is full of grass. Clean the cutting deck, refer to
To remove
the cutting deck on page 16
.
The battery is not charged. Charge the battery.
The lock to the cutting deck is not
engaged or the switch to the lock
is defective.
Attach the cutting deck correctly, refer to
To
attach the cutting deck on page 15
.
Speak to an approved service workshop if
the problem stays.
The cutting deck is not in mow
position.
Move the cutting deck to mow postion, refer
to
To lift and lower the cutting deck on page
18
.
The cutting deck motors are de-
fective.
Speak to an approved service workshop.
The controls for the cutting deck
motors are defective.
The battery does not charge. The battery charger is not con-
nected correctly.
Refer to
To charge the battery on page 17
.
The battery charger is defective. Change battery charger.
The battery is defective. Speak to an approved service workshop.
The battery temperature is above
45°C.
Let the battery cool down for a while.
The battery temperature is to
low.
Move the product to a location with the ap-
proved temperature for the batteries. Refer to
Storage on page 27
.
There is vibration in the product. The blades are loose. Refer to
To examine the blades on page 23
.
One or more of the blades are
not balanced.
Refer to
To examine the blades on page 23
.
The motor is loose. Speak to an approved service workshop.
1263 - 006 - 27.04.2022 25
Loading ...
Loading ...
Loading ...