Loading ...
Loading ...
Loading ...
Troubleshooting
Troubleshooting schedule
If you cannot find a solution to your problems in this
operator's manual, speak to your Husqvarna service
agent.
Problem Cause Action
The first and fourth battery LED
light and the warning indicator on
the display flashes.
The battery is damaged. Speak to an approved service workshop.
Temperature deviation, the bat-
tery is too cold or too hot.
Let the battery become cool down or move
the product to a location with the approved
temperature for the batteries. Refer to
Stor-
age on page 27
.
The warning indicator on the dis-
play has a solid red light.
A fault is found in the product. Stop the product for minimum 5 seconds and
then start the product again.
Speak to an approved service workshop if
the warning indicator has a solid red light
after restart.
The warning indicator on the dis-
play flashes red + blades engag-
ed indicator.
The cutting deck has stopped be-
cause of high load.
Stop the product and wait for the motor to
cool down before you restart.
A fault is found in the control
units on the cutting deck.
Speak to an approved service workshop if
the warning indicator flashes after restart.
Warning indicator flashes fast
and all other LED lights are OFF.
Traction motor control unit is
overheated.
Turn OFF the product and wait for the motor
control unit to become cool.
The warning indicator on the dis-
play flashes red + first battery
LED light.
Empty battery. Charge the battery.
The product cannot be started. The switches for the parking
brake and the seat are not en-
gaged. The cutting deck is not in
transport position or is engaged.
Refer to
To start the product on page 19
.
The forward/rearward pedal is
pushed.
Release the pedals.
The battery charger is connected
to the product.
Disconnect the battery charger before you
start the product.
The display is broken. Speak to an approved service workshop.
The power switch is defective.
The vehicle control unit (VCU) or
its connections is defective.
24 1263 - 006 - 27.04.2022
Loading ...
Loading ...
Loading ...