Loading ...
Loading ...
Loading ...
• Turn the power switch to "0".
Make sure that the product
stops immediately and the
LED lights on the display
goes off.
To do a check of the operation
conditions
Do a check of the operation
conditions daily.
1. Make sure that you cannot
operate the product when
the cutting deck is installed
and the cutting deck lever is
in the mow position.
2. Make sure that you cannot
operate the product when
the parking brake is
disengaged.
3. Make sure that the product
stops when the cutting deck
motors are engaged and you
lift from the seat.
To do a check of the forward
pedal and rearward pedal
1. Start the product. Refer to
To start the product on page
19
.
2. Make sure that the forward
pedal and rearward pedal
are not blocked and can be
operated freely.
3. Push the forward pedal
carefully to move forward.
4. Release the forward pedal
to brake. Make sure that
the brake engages when the
forward pedal is released.
Note: The product has
an automatic brake that
engages when you release
the pedals. For more brake
power when you decrease
the speed, push the other
pedal.
5. Do the same procedure for
the rearward pedal.
Parking brake
WARNING: If the parking
brake does not operate
correctly, the product
can start to move and
cause injury or damage.
Make sure that the
parking brake is regularly
examined and adjusted.
Refer to
To do a check of the
parking brake on page 22
.
Warning indicator on the display
CAUTION:
If the warning indicator on
the display comes on, stop the product and
refer to
Troubleshooting on page 24
.
1263 - 006 - 27.04.2022 13
Loading ...
Loading ...
Loading ...