Loading ...
Loading ...
7 KEEP CHILDREN AWAY
All visttors should be kept a safe distance from work area
8. MAKE WORKSHOP KID PROOF
with padlocks, master switches, or by removing starter keys
9. DON'T FORCE TOOL
It will do the job better and be safer at the rate for which it
was designed.
10. USE RIGHT TOOL
Don't force tool or attachment to do a job for which it was nol
designed.
11: WEAR PROPER APPAREL
No loose clothing, gloves, neckties, rings, bracelets, or
jewelry to get caught in rnoving parts. Nonslip footwear Is
recommended Wear protective hair covering to contain long
hair
12. ALWAYS USE SAFETY GLASSES
Also use face or dust mask if cutting operation is dusty
Everyday eyeglasses only have impact resistant lenses They
are NOT safety glasses
!3 SECURE WORK
Use clamps or a vise to hold work when practical It's safer
than using your hand and frees both hands to operate toot
14 DON'T OVERREACH
Keep your proper footing and balance at all times
15 MAINTAIN TOOLS IN TOP CONDITION
Keep tools sharp and clean for best and safest performance
Follow instructions for lubricating and changing accessories
16 DISCONNECT TOOLS FROM POWER SOURCE
before servicing and when changing accessories such as
blades, bits, cutters, or when mounting and re.mounting
motor.
17..AVOID ACCIDENTAL STARTING
Make sure switch is in *'OFF" position before plugging in
cord
18
19.
USE RECOMMENDED ACCESSORIES
Consult the owner's manual for recommended accessories.
Use of improper accessories may be hazardous
NEVER STAND ON TOOL
Serious injury could occur if the tool is tipped or if the cutting
1ool is unintentionally contacted
20 CHECK DAMAGED PARTS
Before further use of the tool, a guard or other part that is
damaged should be carefully checked to ensure that ii will
operate properly and perform its intended function - check
for alignment of moving parts, btnding of moving parts,
breakage of parts, mounting, and any other conditions that
• may affect its-operation A guard or other part that.is damaged
should be properly repaired or replaced.
21..DIRECTION OF FEED
Feed work into a blade or cutter against the direction of
rotation of the blade or cutter only
22 NEVER LEAVE TOOL RUNNING UNATTENDED TURN
POWER OFF. Don't leave tool until it comes to a complete
stop
23. WEAR EAR PROTECTION
When operating for prolonged period of time, use of ear pro-
tection is recommended
The operation of any power tool can result in foreign objects
being thrown into the eyes, which can result in severe eye
damage. A_ways wear safety goggles complying with ANSI Z87 1
(shown on Package) before commencing power tool operation.
Safety Goggtes are available at Sears retail or catalog stores.
TABLE OF CONTENTS
GENERAL SAFETY RULES FOR POWER TOOLS 2, 3
UNPACKING AND CHECKING CONTENTS 4
SAFETY RULES FOR JOtNTER-PLANER 5
ASSEMBLY .. 5..7
Depth of Cut Hand Knob 5
Chip Deflector 5
Cutter Guard Assembly 5
Fence . _ 6
Fence Extension ....... 6, 7
Checking Cutter Blades 7
INSTALLING THE JOtNTER-PLANER 8
CONTROLS AND ADJUSTMENTS 8, 9
Depth of Cut Hand Knob 8
Check Depth of Cut ........... 9
Fence Adjustment 9
Cutter Guard 9
Guard Stop 9
ONfOFF Switch 9
BASIC JOtNTER-PLANER OPERATION .................. 10-12
Setting the Guard Stop ................................. 10
Feeding the Workplace .......................... 10, 11
Using HolddownfPush Blocks ......................... 11
Beveling, Chamfering ........................ 11, 12
Using a Wet/Dry Vac ................................... 12
MAINTENANCE ..................................... 12, 13
Timing Belt Replacement .................................. 12
Cutter Guard Return Spring .............................. 12
Blade Replacement and Adjustment ..................... 13
General Maintenance ...................................... 13
REPAIR PARTS ..................................... 14, 15
TROUBLE SHOOTING ................................... 16
How to Order Replacement Parts ........................... 16
Loading ...
Loading ...
Loading ...