Loading ...
FULL ONE.YEAR WARRANTY ON CRRFTSMRN ,JOINTER -- PLANER
If within one year from the date of purchase, this Craftsman Jointer -- Planer fails due to a defect
in material or workmanship, Sears will repair it, free of charge.
WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE NEAREST SEARS STORE OR SERVICE
CENTER IN THE UNITED STATES.
This warranty gives you specific legal rights and you may also have other rights which vary from
state to state°
Sears, Roebuck and Co. Dept. 698173tA, Sears Tower, Chicago, IL 60684..
GENERAL SAFETY RULES FOR POWER TOOLS
1. KNOW YOUR POWER TOOL
For your own safety, read the owner's manual carefully
Learn its application and limitations as well as the specific
hazards peculiar to this tool
2 GROUNDING INSTRUCTIONS
A All grounded, cord-connected tools:
In the event of a malfunction or breakdown, grounding pro°
vtdes a path of ]east resistance for electric current to reduce
the risk of electric shock This Iool is equipped with an
electric cord having an equipment.grounding conductor and
a grounding plug. The plug must be plugged into a matching
outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
Do not modify the plug provided - if it will not fit the outlet,
have the proper outlet instafled by a qualified electrician
Improper connection of the equipment-grounding conductor
can result in a risk of electric shock The conductor wilh
insulation having an outer surface that is green with or with-
out yeltow stripes is the equipment-grounding conductor If
repair or replacement of the electric cord or plug is necessary,
do not connect the equipment-grounding conducto_ to a live
terminal
Check with a qualified electrician or serviceman if the
grounding instruclions are not complelely understood, or if
in doubt as to whether the too] is properly grounded
The use of any Extension Cord will cause some loss of power
To keep this Io a minimum and to prevent overheating and
motor burn-out, use the table below to determine the MINI..
MUM wire size (A.WG) Extension Cord
Use only 3-wire extension cords that have 3-prong grounding
plugs, and 3-pole receptacles that accept the tool's plug
Extension Cord Length Wire Size, A WG
25 Feet 16
50 Feet 16
100 Feet 14
Extension Cords suitable tor use with your Joinler-Ptaner are
available at your nearest Sears Calalog Order or Retail Store
Repair or replace damaged or worn cord immediately
B Grounded, cord.connected tools intended for use on a
supply circuit having a nominal rating Jess than 150 votts:
This tool is intended for use on a circuit that has an outJet
that looks like the one illustrated in Sketch A in Figure 1. The
too] has a grounding plug that looks like the plug illustrated
in Sketch A in Figure ! A temporary adapter, which looks like
the adapter illustrated in Sketches B and C, may be used to
connect this plug to a 2-pole receptacle as shown in Sketch
B if a properly grounded outlet is not available. The temporary
adapter should be used only until a properly grounded outlel
can be tnstatted by a qualified electrician. The green_colored
rigid ear, lug, ete extending from the adapter must be con..
nected to a permanent ground such as a properly grounded
outlet box
Adapter
(C) Mea_ls
Figure I -- Wiring Methods
_L
4
5
6
KEEP GUARDS IN PLACE
in working order and in proper adjustment and alignment.
REMOVE ADJUSTING KEYS AND WRENCHES
Form habit of checking to see that keys and adjusting
wrenches are removed from tool before turning on lool
KEEP WORK AREA CLEAN
Cluttered areas and benches invite accidents
DON'TUSE IN DANGEROUS ENVIRONMENT
Don't use power tools in damp or wet feeations, or expose
them to ratn_ Keep work area well illuminated
Loading ...
Loading ...
Loading ...