Loading ...
Loading ...
Loading ...
Thumbscrew
Fig. 8
Bracket (L) Evaporator Cube Guides Water Tank Bracket (R) Overow Pipe
13) Move the service switch to the “DRAIN" position, then move the control switch to the
“SERVICE" position.
14) Repeat steps 9 through 13 three more times to rinse thoroughly.
15) After 2 minutes, move the control switch to the “OFF" position.
16) Disconnect the overow pipe. Next, remove the water tank by removing the two
thumbscrews and pulling the tank towards you slightly and pushing it down. Be careful
to avoid breakage when handling the parts. See Fig. 8.
17) Pull the cube guides (quantity varies depending on model) upward to remove them from
the water tank. They are snapped in place. See Fig. 9.
18) Dilute 5 . oz. (148 ml) of recommended cleaner Hoshizaki “Scale Away" with 1 gallon
(3.8 lit.) of water.
19) Wash the bin control switch, water tank, oat switch, cube guides, and overow pipe by
using a nylon scouring pad, brushes and the cleaning solution. See Fig. 10. In addition
to the removed parts, also wash the bin liner and brackets (L) and (R) with the solution.
20) Discard the cleaning solution and rinse the parts thoroughly with water.
23
Loading ...
Loading ...
Loading ...