Loading ...
Loading ...
Loading ...
Fig. 1
Air Inlet*
(Air Filter)
Louver
Magnet Catch
Air Filter*
Door
Separator
(inside)
How to remove Louver
* KM-231BAJ, KM-301BAJ only
B. Checks Before Installation
NOTICE
• Remove all shipping cartons, tape, and packing material. If any are left in the
appliance, it will not work properly.
• Remove the shipping tape holding the door and separator. See Fig. 1.
• Visually inspect the exterior of the shipping container and immediately report any damage
to the carrier. Upon opening the container, any concealed damage should also be
immediately reported to the carrier.
• Remove the package containing the accessories.
• Remove the protective plastic lm from the panels. If the appliance is exposed to the sun
or to heat, remove the lm after the appliance cools.
• Check that refrigerant lines do not rub or touch lines or other surfaces, and that the fan
blade (if applicable) turns freely.
• Check that the compressor is snug on all mounting pads.
• See the nameplate inside the bottom front of the right side panel (behind the louver), and
check that your voltage supplied corresponds with the voltage specied on the nameplate.
C. How to Remove Louver
See Fig. 1
• Louver: Pull the top towards you, and lift off when the magnet catches come off the body.
11
Loading ...
Loading ...
Loading ...