Loading ...
Loading ...
Loading ...
H. Startup
WARNING
All parts are factory-adjusted. Improper adjustments may adversely affect safety,
performance, component life, and warranty coverage.
NOTICE
• If the appliance is turned off, wait for at least 3 minutes before restarting the
appliance to prevent damage to the compressor.
• To prevent damage to the water pump, do not leave the control switch in the
“SERVICE" position for extended periods of time when the water tank is empty.
• At startup, conrm that all internal and external connections are free of leaks.
1) Open the water supply line shut-off valve.
2) Remove the louver.
3) Make sure the control switch is in the “OFF" position. Plug the appliance into the
electrical outlet. WARNING! To reduce the risk of electric shock, do not touch the
control switch or plug with damp hands. If you have to slide the appliance back
for a built-in installation, make sure you do not damage or pinch the water supply
line, drain line, or power cord.
4) Move the control switch to the “ICE" position.
5) Allow the appliance to operate for 5 minutes.
6) Move the control switch to the “SERVICE"
position. Move the service switch to the
“WASH" position.
7) Allow the appliance to operate for 5 minutes.
8) Move the service switch to the “DRAIN"
position.
9) Allow the appliance to drain for 2 minutes.
10) Move the control switch to the “OFF" position,
then unplug the appliance from the electrical
outlet.
11) Open the door.
12) Clean the ice storage bin using a neutral
cleaner. Rinse thoroughly after cleaning.
13) Make sure the control switch is in the “OFF"
position. Plug the appliance into the electrical
outlet.
14) Move the control switch to the “ICE" position.
15) Replace the louver in its correct position.
Fig. 7
Control Box
Control Switch
Service Switch
SERVICE
OFF
CIRCULATE
ICE
DRAIN
WASH
19
Loading ...
Loading ...
Loading ...