Loading ...
Loading ...
Loading ...
Frequently Asked Questions
95
Message Possible cause and solution
lights up red in the
display and an alarm
also sounds.
Indication of an interruption to the power supply: the
temperature in the freezer section over the last few
days or hours has risen too high because of a power
failure.
Tap
.
The fault message is confirmed:
goes out and the alarm will stop.
The warmest temperature recorded in the freezer
section will flash for about 1minute on the tempera-
ture display for the freezer section. Then the temper-
ature display will change to the current temperature
in the freezer section.
You can exit from the flashing temperature display
early:
Touch the temperature display for the freezer sec-
tion.
The warmest temperature displayed will disappear.
The display will then revert to showing the current
temperature in the freezer section. The appliance will
go back to the last temperature setting when the
power is restored.
Rectify the cause of the alarm.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, cook it
before freezing it again.
Loading ...
Loading ...
Loading ...