Loading ...
Loading ...
Loading ...
Selecting additional settings
56
Switching off Demo mode
Demo mode allows the refrigeration
appliance to be presented in the show-
room without the cooling system being
switched on. Do not activate this setting
for domestic use.
If Demo mode has been switched on
as a default setting, will show on the
status display.
Tap.
Tap.
Swipe left or right until is shown in
the middle.
Tap.
After Demo mode has been switched
off, the refrigeration appliance shuts
down and must be switched on again.
Resetting the settings to their default
settings
All settings made on the refrigeration
appliance will be reset to default set-
tings (for settings; see “Guide to the ap-
pliance”).
Tap.
Swipe left or right until is shown in
the middle.
Tap.
will appear on the display.
Touch OK.
The refrigeration appliance shuts down
and must be switched on again.
Information
Appliance data (model identifier and
serial number) is shown on the display.
Tip: This data is important when report-
ing an appliance fault to Miele Cus-
tomer Service (see “Customer Ser-
vice”).
Carbon-filter change indicator
After inserting the carbon filter (optional
accessory), you must activate the car-
bon-filter change indicator in Set-
tings mode.
The carbon-filter change indicator
on the status display will remind you
to replace the carbon filter approx. ev-
ery 6months (see “Cleaning and care
– Replacing the carbon filters”).
Loading ...
Loading ...
Loading ...