Loading ...
Loading ...
Loading ...
a. Screw the reverse flushing bonder (5) on the fuel distributor.
b. Put reverse flushing “O” ring on the injector, and install injector by
reverse direction.
c. Put the reverse flushing bonder (9) on the cylinder bracket.
d. Fasten the injector on the machine (see Fig. above).
3.3.2 Steps
11 Reverse Flushing
1) Connect black hose (outlet) to inlet port of the fuel distributor, and
then connect the actuation cable to the machine.
2) Press Left or Right arrow key to select Reverse Flushing.
3) Press RUN key (default test time is 1 minute).
4) Turn Pressure Adjusting Knob until the pressure is 0.25-0.3MPa.
5) When the working time is over, the machine will stop.
Loading ...
Loading ...
Loading ...