Loading ...
Loading ...
1. LED screen
2. Start: To run the function that selected;
3.Arrow key: To adjust pulse working time and injection times;
4. PAUSE
5. Arrow key: To select function item and adjust pulse width ;
6. STOP
7. Pressure down
8. Pressure up
Ⅲ Operation
3.1 Ultrasonic Cleaning
3.1.1 Preparation
1)Move the injector from the car. Check and make sure that the seal ring
of the injector is in good condition. If not, please replace it to avoid the
leakage. Clean out side of injector carefully by gasoline or cleaning fluid.
2)Connect the machine to power supply and turn it on.
3)Put the cleaning frame on the ultrasonic groove, and put the injector
into the whole of the frame.
3.1.2 Steps
01 Ultrasonic Cleaning
1)Pour proper quantity cleaning fluid into ultrasonic groove.
2)Connect the actuation cable to the injector needed to be cleaned.
3)Press Left or Right Arrow key to select “Ultrasonic Cleaning” from
panel, then press “RUN” key.
4)Press Left or Right Arrow key to set up working time(default time is
10 minutes).
Loading ...
Loading ...
Loading ...