Loading ...
Loading ...
Loading ...
the injector is blocked by the impurity.
Exchanging Process
Step 1: Remove the fluid-release screw cap to let all the liquid out.
Step 2: Pour some new fluid to wash the inside and then release it.
Step 3: Fix the screw cap on, and add two bottles of new cleaning fluid.
Exchange Protector Tube
Step 1: The protector case is on the unit’s power receptacle.
Step 2: Open the case, and then you will see the tube.
Step 3: Change a new one if the tube was melted.
Notice
1. The measuring cylinders are made of quartz glass, and fragile. No
striking!
2. Before start the unit, please check the power supply, connector plugs
and protector tube to ensure that they are in good condition.
3. Warranty will be cancelled if dismantle the unit without permission.
4. Damage will occur if run the ultrasonic cleaning function without
special cleaning fluid.
5. Before exchanging the new testing fluid, the used one must be
released entirely, then adding two bottles (1800ml) for using.
6. Taking use of the special testing or cleaning fluids which designed for
unit, for other ones will flake the surface painting coat off..
7. Never using coal oil, petrol or thinner for as cleaning or testing fluid.
8. Never mix the testing and cleaning fluids for usage.
9. The trouble caused by using other fluids or liquid is beyond the
Loading ...
Loading ...
Loading ...