Loading ...
Loading ...
Loading ...
5）Press “RUN” key. (You can press PAUSE or STOP at any time during
the operation process.)
6）After the cleaning is completed, it will stop automatically.
7）Take the injector out of the ultrasonic groove.
NOTE:
1. During the cleaning, get the injector close to ear, listen carefully, you
may hear the intermittent sound of closing and opening of the
injector’s valve, otherwise the injector’s valve is blocked.
2. Please do not turn on the ultrasonic trough when there is not clean
fluid in the trough, otherwise the machine will be damaged.
3.2 Injector Test
This function is to test the condition of atomization, drop, block, spray
angle, and uniformity of the injector.
3.2.1 Preparation
1) Pour about 1900ML test fluid into the machine through measuring
cylinder.
2) Install the injector
Installation of Up-inlet Injector
a. Take the coupler and plugs from the toll drawer and install them to fuel
Loading ...
Loading ...
Loading ...