Loading ...
Loading ...
Loading ...
distributor.
b. Put some grease on the “O” ring of the injector, and install it into the
coupler of the fuel distributor.
c. Put the fuel distributor and injector on the machine and fasten it by
fasten bolt.(For some special injector, it need to use lengthened bolt,
washer to fasten it.)
Installation of Side-feed Injector Installation Diagram
a. Select the suitable coupler④ and “O” loop③, and then put the “O”
loop on the coupler. (Put a little lubricant on the coupler and the “O”
loop.)
b. Put the injector⑨ into the coupler, and then put them together into the
fuel distributor⑥.
c. Install the hold plate②. Tighten the screw⑤ on the hold plate. Adjust
the suitable height by screw④.
d. Install the fuel distributor and injector to the fuel distributor rack⑦.
e. Connect the adaptor of black hose with the male terminal⑧ on the fuel
distributor. Connect the drive wire of injector, and prepare to test.
3.2.2 Steps
Loading ...
Loading ...
Loading ...