Loading ...
Loading ...
Loading ...
6) Adjust system pressure, (normally the pressure should between
0.25-0.3Mpa).
7) Press RUN key, and turn on the engine after several seconds.
8) Pour Non-dismantle cleaning fluid into one of the measuring cylinder
of the machine (0.5 bottle for 4 cylinder engine).
9) Adjust engine speed, make it to run 1-10 minute under idle speed,
10-15 minutes under medium and high speed;, and run under idle
speed again in the rest of the time.
10) When the setting time is zero, the machine will stop automatically.
Remove the hose and let the engine back to its normal condition.
11) Turn on the engine and run it for 2-3 minutes under high speed, and
check if there is any leakage occurs.
Note:
1) The Non-dismantle cleaning fluid is inflammable, so please take care
to avoid any hurt.
2) Make sure that all the connections are in good condition before
performance the cleaning.
IV Tidy and Maintenance
4.1 Tidy
Step 1: Shut down the power supply.
Step 2: Put the test and cleaning fluid back to the original bottle, and
clean the machine with dry soft cloth.
Step 3: The testing fluid in tank should be put back to original bottles for
preservation.
4.2 Maintenance
Exchange Cleaning Fluid
After being used for long time, the fluid must be changed to avoid that
Loading ...
Loading ...
Loading ...