Loading ...
Loading ...
Loading ...
20
4 Permanent settings in programming mode
Precondition:The start screen is displayed.
T Press the
‘P’ button for approximately
2 seconds to enter programming mode.
T Press the ‘’ button.
T Press the
‘Machine settings’ button.
T Press the
‘’ button.
‘2/5’
T Press the ‘Factory setting’ button.
‘Factory setting’ / ‘Reset the machine to the
factory settings?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
Your ENA is switched off.
Unit for amount of water
In the program item
‘Machine settings’/ ‘Units’
you can select the unit used for the amount of
water.
Example:Proceed as follows to change the unit for
the amount of water from
‘ml’ to ‘oz’.
Precondition:The start screen is displayed.
T Press the
‘P’ button for approximately
2 seconds to enter programming mode.
T Press the ‘’ button.
T Press the
‘Machine settings’ button.
T Press the
‘’ button.
‘2/5’
T Press the ‘Units’ button.
‘Units’
T Press the ‘oz’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings’
T Press the ‘Back’ button for approximately
2 seconds to return to the start screen.
Setting the water hardness
The harder the water is, the more frequently the
ENA needs to be descaled. It is therefore important
to set the water hardness accurately.
The water hardness was set when the machine was
first used. You can change this setting at any time.
The water hardness can be adjusted on a
continuous scale between 1 °dH and 30 °dH.
Precondition:The start screen is displayed.
T Press the
‘P’ button for approximately
2 seconds to enter programming mode.
T Press the
‘’ button.
T Press the
‘Machine settings’ button.
T Press the
‘’ button several times until page
‘3/5’ is displayed.
T Press the
‘Water hardness’ button.
‘Water hardness’
T Press the ‘<’ or ‘>’ button to change the
setting.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings’
T Press the ‘Back’ button for approximately
2 seconds to return to the start screen.
Language
In this program item you can set the language
used by your ENA.
Example:Proceed as follows to change the
language from
‘English’ to ‘Deutsch’.
Precondition:The start screen is displayed.
T Press the
‘P’ button for approximately
2 seconds to enter programming mode.
T Press the ‘’ button.
T Press the
‘Machine settings’ button.
T Press the
‘’ button several times until page
‘3/5’ is displayed.
T Press the
‘Choose language’ button.
‘Choose language’
T Press the ‘Deutsch’ button.
‘Gespeichert’ appears briefly on the display.
‘Geräteeinstellungen’
T Press the ‘Zurück’ button for approximately
2 seconds to return to the start screen.
Loading ...
Loading ...
Loading ...