Loading ...
Loading ...
Loading ...
13
2 Preparation
es
fr
en
it
fr
pt
en
U
During preparation you can change the preset
amounts (e.g. water and amount of milk
foam) by pressing the
‘<’ and ‘>’ buttons.
U
If you have selected settings during preparation,
you can save these changes after preparation.
To do this, press the
‘Save’ button.
U
You can stop preparation at any time. To do
this, press the
‘Cancel’ button.
U
The water volume is given as standard in ‘oz’.
You can change this setting to ‘ml’ in
programming mode (see Chapter 4
‘Permanent settings in programming
mode – Unit for amount of water’).
Coffee tastes best served hot. A cold porcelain cup
cools the beverage – and impairs the taste. We
therefore recommend pre-warming the cups. The
full coffee aroma can develop only in pre-warmed
cups. You can purchase a JURA cup warmer from
your specialized dealer.
You can make permanent settings for all products
in programming mode (see Chapter 4 ‘Permanent
settings in programming mode – Adjusting the
product settings’).
Espresso, coffee and other coffee
specialties
Ristretto, espresso and coffee are all prepared
following this model.
Two brewing operations are carried out for the
espresso doppio to create a particularly full-bodied
and aromatic coffee specialty.
Example:Proceed as follows to prepare one coffee.
Precondition:The start screen is displayed.
T Place a cup under the dual spout.
T Press the ‘Coffee’ button.
Preparation starts.
‘Coffee’ and the coffee
strength are displayed. The preset amount
of water for coffee flows into the cup.
Preparation stops automatically. Your ENA is
once more ready for use.
Latte macchiato, cappuccino and other
coffee specialties with milk
Your ENA prepares latte macchiato, cappuccino
and other coffee specialties with milk at the touch
of a button. There is no need to move the glass or
cup.
Example:Proceed as follows to prepare one latte
macchiato.
Precondition:The start screen is displayed. Milk is
connected to the dual spout.
T Place a glass under the dual spout.
T Press the
‘’ or ‘’ button the number of
times needed to display page
‘2/5’.
T Press the
‘Latte macchiato’ button.
‘Latte macchiato’, the preset amount of milk
foam flows into the glass.
E There is a short interval while the hot milk
separates from the milk foam. This allows
the typical layers of a latte macchiato to
form.
Coffee preparation starts. The preset
amount of water for espresso flows into the
glass. Preparation stops automatically.
Your ENA is once more ready for use.
Loading ...
Loading ...
Loading ...