Loading ...
Loading ...
Loading ...
‘Global’ parameters
51
nd it dicult to read.
Parameter Setting
Display Contrast 1~10
Tuning
This parameter can be selected using [MENU] button “Global”
“Tuning”.
This parameter allows you to tune your BK-3 to acoustic instruments
that cannot be tuned. The default is 440.0Hz.
Parameter Setting
Tuning 415.3~466.2Hz
Rhythm/SMF Track Mute
See “Using ‘Track Mute’ and ‘Center Cancel’” (p. 30).
One Touch Hold
This parameter can be selected using [MENU] button “Global”
“One Touch Hold”.
The parameters on this page allow you to lter certain “One Touch”
settings. Select “On” for the settings you do not want to load along
with the remaining One Touch settings when you press a ONE
TOUCH button.
Parameter Setting
Tempo O, On
Tone Part O, On
Intro/Ending O, On
Variation O, On
Scale Tune O, On
Performance Hold
This page can be selected using [MENU] button “Global”
“Performance Hold”.
The parameters on this page allow you to lter certain Performance
settings. Select “On” for the settings you do not want to load
along with the remaining settings when you select a Performance
memory.
Parameter Setting
Rhythm* O, On
Tempo* O, On
Tone* O, On
Tone Part O, On
Parameter Setting
Split O, On
Lower Octave O, On
Arr Type O, On
Key* O, On
Bass Inversion O, On
Scale Tune O, On
[*] These parameters can also be switched by pressing and holding
the assigned buttons on the front panel. (See the “Hold to LOCK”
legends on the frontal panel.
Metronome
These parameters can be selected using [MENU] button “Global”
“Metronome”.
The BK-3 is equipped with a metronome that can be used in various
situations.
For more information on these parameters see “Using the
Metronome” (p. 35).
Favorite
The Favorite sound list is displayed.
For more information see “9. Favorite Tones” (p. 21).
Utility
The “Utility” parameters are found on the display page that can be
selected using [MENU] button “Global” “Utility”.
The following table shows the utility parameters.
Parameter Setting Explanation
SMF Quick Start
O, 2nd Bar,
1st Note
• “O”: Playback starts at the very
beginning of the song le (which
may contain a few silent bars).
• “2nd Bar”: Causes playback to start
from measure 2 of the selected
Standard MIDI File.
• “1st Note”: This is basically the same
as the above, except that playback
starts on the rst note of the selected
song.
Speaker Mode Auto, On
• “Auto”: The internal speakers are
automatically shut o when a plug is
inserted into PHONES/OUTPUT jack
(default).
• “On”: The internal speakers are
always active.
Loading ...
Loading ...
Loading ...