Loading ...
Loading ...
Loading ...
Activating the ‘Play All Songs’ parameter for the USB memory
29
The [*/, ] button’s indicator lights and song playback starts.
3. If necessary, you can change the song’s playback tempo:
• Press the TEMPO [] or [] button to decrease or increase the
tempo.
NOTE
If you set a tempo value close to the upper or lower limit for an
mp3 or WAV le, playback may sound a little strange.
• Press the [TAP TEMPO] button at least three times at the desired
tempo. (This function is not available if you selected an audio le
(WAV or mp3).)
TheBK-3 calculates the intervals between your presses and sets the
corresponding tempo value.
MEMO
Simultaneously press the TEMPO [] and [] buttons
(“STANDARD”) to return to the rhythm’s preset tempo.
4. Press the [START/STOP]/[*/, ] button again to pause song
playback.
The [START/STOP]/[ */, ] button goes dark.
5. Press [START/STOP]/[*/, ] button yet again to resume
playback.
6. Press the [SYNC START] /[ + ] button to stop playback
The Playback stops and the playback position return to the
beginning of the song.
You can use the following buttons to control song playback (see the
gray legends):
Button Explanation
Starts or pauses song playback.
Stops song playback and allows you to return to the
beginning of the current song.
Rewinds the song.
Fast-forwards the song.
Activating the ‘Play All Songs’
parameter for the USB memory
Activating the ‘Play All Songs’ function
1.
Connect an optional USB memory to the BK-3 or, if it was
already inserted, press the [USB MEMORY] button.
After a few seconds, the display shows the contents of the USB
memory.
2. Use the [UP] or [DOWN] button to select the folder that
contains the songs you want to listen to.
3. Press the [ENTER] button to open the folder.
4. Use the [UP] or [DOWN] button to select the song where
you want playback to start.
5. Press [ENTER] to conrm your selection.
6. Press the [USB MEMORY] button to activate the playback
function of the selected and all subsequent songs.
The following message appears:
NOTE
STL les contained in the selected folder will be ignored when
you start playback (see below).
7. Press the [START/STOP]/[*/, ] button to start playback of
all songs.
NOTE
While playback of all songs is running, you can navigate the
USB memory (to check its contents, for example). The “Play All
Songs” function continues to play back the les of the folder you
selected in step (2) above.
If you select a dierent le while navigating (by pressing
[ENTER]), the “Play All Songs” function is switched o.
Loading ...
Loading ...
Loading ...