Loading ...
Loading ...
Loading ...
Selecting the Track(s) to Mute for Rhythms or SMF Songs
31
The “Track Mute” or “Center Cancel” function will turn on. This
depends on the le type you selected:
File Type Function Explanation
Rhythm Track Mute
The specied rhythm track(s) is
muted (Default: AC1~AC6).
SMF Track Mute
The specied Standard MIDI le
track is muted (Default: channel
4).
Audio (mp3, Wav) Center Cancel
Sounds in the center (the melodic
portion of the sound) will be
minimized.
NOTE
For some audio songs, the vocal sound may not be eliminated
completely.
3. Press the [TRACK MUTE] (CENTER CANCEL) button again
to make its indicator go dark.
This switches the “Track Mute” or “Center Cancel” function back o.
Selecting the Track(s) to Mute for
Rhythms or SMF Songs
The following procedure allows you to specify the track of the selected
Standard MIDI File that should be muted when you switch on the [TRACK
MUTE] button.
NOTE
This function is not available for audio les.
1. Select a rhythm or an SMF song.
2. Press and hold the [TRACK MUTE] (CENTER CANCEL)
button.
This function can also be selected using [MENU] button “Global”
“Rhythm/SMF Track Mute”.
Depending on the le type, the display changes to…
... or:
When you start playback, you will notice that active parts are
indicated by moving bar graphs that simulate level meters. If
[TRACK MUTE] (CENTER CANCEL) button lights the bar graphs of
muted parts do not move.
3. Use the [UP] or [DOWN ] button to move the cursor to the
track you want to mute.
The name of the Tone assigned to that track appears in the upper
left corner.
4. Press the [ENTER] button to highlight the corresponding
parameter.
5. Use the [INC] or [DEC ] button to change the setting .
The possibilities are:
Display indication Explanation
<no indication> The associated track is played back.
M
The associated track is no longer played back
(muted).
If you want to save your selection of the track(s) that should be
muted for any Rhythm or SMF le you play back, see “Save
Global” (p. 53).
When you start playback, you will notice that active parts are
indicated by moving bar graphs that simulate level meters. The bar
graphs of muted parts do not move.
6. If there is no need to save your settings, press and hold
the [EXIT] button to return to the main page.
Loading ...
Loading ...
Loading ...