Loading ...
Loading ...
Loading ...
‘Performance Edit’ parameters
47
N. Mfx Type N. Mfx Type N. Mfx Type
19 Mod. Delay 47 Speaker Sim 75 Tape Echo
20 3 Tap Delay 48 Step Phaser 76 LoFi Noise
21 4 Tap Delay 49 MLT Phaser 77 LoFi Comp
22 Time Delay 50 Inf Phaser 78 LoFi Radio
23 2 Pitch Shifter 51 Ring Modul 79 Telephone
24 FBK Pitch 52 Step Ring 80 Phonograph
25 Reverb 53 Tremolo 81 Step Pitch
26 Gate Reverb 54 Auto Pan 82 Sympa Reso
27
ODChorus
55 Step Pan 83 Vib-Od-Rotary
28
ODFlanger
56 Slicer 84 Center Canc
NOTE
Some of the names shown above may be abbreviated in the
display.
Mfx Edit
1.
If you want to edit the parameters of the selected eect
type, you have to press the [ENTER] button to select the
“Mfx Edit” page.
2. Use the [UP] or [DOWN] button to select the desired
parameter .
3. Use the [INC] or [DEC] button to set the desired value.
The rst two parameters for each Mfx type are “Chorus Send”
(0~127) and “Reverb Send” (0~127).
They allow you to specify whether—and to what extent—the Mfx
signal should be processed by the Chorus and/or Reverb eect.
The other parameters in the page depend on the Mfx type that you
selected.
‘Rhythm Parts’ parameters
This function group can be selected using [MENU] button “Performance
Edit” “Rhythm Parts”.
The parameters of this function group apply to the eight Automatic
Accompaniment parts (i.e. the parts used to play back the selected
rhythm).
1. Use the [INC] or [DEC] button to select the rhythm part
you want to edit (ADrum, ABass, Acc1, Acc2, Acc3, Acc4,
Acc4, Acc5, Acc6).
The display shows the settings for the selected part.
2. Use the [UP] or [DOWN] button to select the desired
parameter .
3. Use the [INC] or [DEC] button to set the desired value.
The following parameters are available:
Mute
Allows you to mute the selected part, so that it is no longer audible.
Parameter Setting
Mute O, On
Solo
Allows you to solo the selected part, which means that all other
rhythm parts are switched o.
Parameter Setting
Solo O, On
Volume
Adjusts the volume of the selected rhythm part.
Selecting “0” means that the part is question is no longer audible.
Parameter Setting
Volume 0~127
Split
This page allows you to set two keyboard-related parameters. It can be
selected using [MENU] button “Performance Edit” “Split”.
MEMO
This page can also be selected by pressing and holding the
[SPLIT] button.
Split Point
The “Split Point” parameter allows you to set the split point.
Parameter Setting
Split Point C#2~B6
TIPS
Selecting the “Split Point” eld and after pressing the [ENTER]
button, you can set the split point by simply pressing the
corresponding key on the keyboard.
Lower Hold
This parameter allows you to set the Hold function for the LWR part.
Parameter Setting
Lower Hold O, On
If you set this parameter to “On”, the notes of the LWR part go on
sounding until you play other notes in the left keyboard area. (This
function is only available while the [SPLIT] button lights.)
If you select “O”, the LWR part stops sounding as soon as you
release all keys in the left area.
Scale Tune Switch
This parameter can be selected using [MENU] button
“Performance Edit” “Scale Tune Switch”.
Loading ...
Loading ...
Loading ...