Loading ...
Loading ...
Loading ...
STARTING/CANCELING A FUNCTION
After setting a function, you must press START/
85s,c ENTER to start the function. If you do not
_ ress START/ENTER within 5 seconds of
setting, "START?" will show on the
display as a reminder. If you do not press
START/ENTER within 5 minutes of
setting, the time of day will appear.
OFF/CANCEL will cancel any function except the
clock, timer, or control lock. When you
press OFF/CANCEL, the display will show
the time of day or, if the minute timer is
also being used, the time remaining.
ULTRABAKE rMBAKING/ROASTING
Your oven is designed with the UItraBake
temperature management system to constantly
monitor oven temperature. The bake element
will cycle, as needed, to maintain the desired
temperature. This feature is automatically
activated when the oven is in operation.
1, Place the SturdiGlide TM racks where you need
them in the oven.
For more information, see "Positioning racks and
pans" in the "Using the oven" section, p. 13.
NOTE: Do not place food directly on the oven
door or oven bottom
Rear of rack
2. Choose the bake setting (optional). PRESS YOU SEE
3. Set the temperature (optional). PRESS
Do this step if you want to set a temperature
other than 350°R Press • to raise the TEMP
temperature or • to lower the temperature in [A I
5°F amounts. Use these pads until the desired
temperature shows on the small display.
YOU SEE
(example for bake at 375°F)
18
Loading ...
Loading ...
Loading ...