Loading ...
Loading ...
Loading ...
THE ELECTRONIC OVEN CONTROL
UltraBake TM
electronic display
Kitchen timer set
and off pad
(pp. 16, 17)
TEMP
SELECTOR I @
Oven selector Temperature
pad pad
(bake, p. 18; (pp. 18, 21, 23,
broil, pp. 22, 23; 25, 27)
clean, pp. 33, 34)
1] Clock and
_ITO"ENTIMER _ . | | manual oven
...............light pad
(p . 16, 40)
@@HOUR MIN _ i
_ .....................
TIMED OVEN
( )
COOK STAR T S TOP
TtME TIME TiME
Timed oven Hour Minute Start/enter
control pad pad pad and off/cancel
(pp. 25-29) (pp. 16, 26, 27, pad
28,33,34) (pp. 15, 16, 17,
19, 21, 23, 26, 28)
• When you first plug in the range, everything on
the display will light up for 1 to 2 seconds, then
a time of day and "PF" will appear on the
temperature display. Press OFF/CANCEL to clear
"PF" from the display. If, after you set the clock
(see "Setting the clock," p. 16), "PF" again
appears on the display, your electricity was off
for a while indicating a Power Failure. Reset the
clock, if needed.
• When you are not using the oven, the control is
an accurate clock.
• When you are using the oven or kitchen timer,
the display will show times, temperature
settings, and what command pads have been
pressed.
• When showing the time of day, the display will
show the hour and minutes.
• When you are using the kitchen timer, the
display will show minutes and seconds in the
following sequence:
- For settings from 1 to 59 minutes, the display
will count down each second.
- For settings one hour or over, the display will
count down each minute.
• When you are using cook time and/or stop time,
@ _ thedisplaywillshowhours
and minutes or minutes and
seconds.
Ust / g cor t o 0@:
The control lock lets you shut down the control
panel command pads. The control lock comes in
handy when you want to prevent others from using
the oven.
NOTES:
• You can only use the control lock when the oven
is not in use or the control has not been set.
• Set the control lock when cleaning the control
panel to prevent yourself from accidentally turning
on the oven.
• The control lock will stay on even after a power
failure.
To lock the control panel:
Press and hold START/ENTER for 5 seconds.
P,,,,c You will hear a single tone and "Loc" and
_ will appear on the temperature display.When the control is locked, "START?"
will appear on the display and 3 tones
will sound if you press any command pad other than
clock or timer set.
To unlock the control panel:
Press and hold START/ENTER for 5 seconds. You
85s,c will hear 3 t_nes followed by a single tone.
_ Loc" and [] will disappear from thetemperature display.
15
Loading ...
Loading ...
Loading ...