Loading ...
Loading ...
Loading ...
12
ENG
Failure Problem Solution A Solution B
The LED does not
come on when unit
is plugged in.
No power supplied.
Check to see if plug is secured
tightly in outlet and that outlet is
working.
The accessorial power
board and the display
board connected failure.
Check the connection.
The accessorial power
board is damaged.
Replace the accessorial power
board.
The display board is
damaged.
Replace the display board.
Some buttons can’t
work, or the LED
display is not
normal.
The display board is
damaged.
Replace the display board.
The Cooking Mode
Indicator comes on,
but heating does
not start.
High temperature of the
hob.
Ambient temperature may be too
high. Air Intake or Air Vent may
be blocked.
There is something wrong
with the fan.
Check whether the fan
runs smoothly, if not , replace the
fan.
The power board is
damaged.
Replace the power board.
Heating stops
suddenly during
operation and the
display flashes “u”.
Pan Type is wrong.
Use the proper pot (refer
to the instruction manual.)
Pan detection circuit is damaged,
replace the power board.
Pot diameter is too small.
Cooker has overheated
Unit is overheated. Wait for
temperature to return to normal.
Push “ON/OFF” button to restart
unit.
Heating zones
of the same side
(Such as the first
and the second
zone ) would
display “u” .
The power board and the
display board connected
failure;
Check the connection.
The display board of
communicate part is
damaged.
Replace the display board.
The Main board is
damaged.
Replace the power board.
Fan motor sounds
abnormal.
The fan motor is damaged. Replace the fan.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the induction hob.
Specific Failure & Solution
Loading ...
Loading ...
Loading ...