Loading ...
Loading ...
Loading ...
maintenance
WARNING: FOR YOUR OWN SAFETY, TURN
SWITCH "OFF" AND REMOVE PLUG FROM
POWER SOURCE OUTLET BEFORE ADJUST-
ING, MAINTAINING, OR LUBRICATING
YOUR FINISHING MACHINE.
Keep your machine and your wolkshop clean The dust
traps around the disc ancl the belt are designed to deflect
most of the fine dust They should be connected to a
Home-N-Shop Vac for most efficient dust removal
WARNING: DO NOT ATTACH A HOME-N-
SHOP VAC WHEN FINISHING IRON OR
STEEL. THE SPARKS COULD IGNITE THE
DEBRIS AND CAUSE A FIRE.
If power cord is worn or cut, or damaged in any wav.
have it replaced immediately
Frequently blow out any dust that may accumulate
inside the motor
For motor maintenance, follow instructions furnished
with motor
A coat of automobile-type wax applied to the worktable
will help prevent rust and make it a little easier to feed
the work while finishing
Do not apply wax to the belt table because the belt
could pick up the wax and deposit it on the pulleys,
causing the belt to slip
MOTOR
OUTLET
WIRING DIAGRAM
WHITE
SWITCH
(_] GREEN
BLACK
m m
WHITE
Insulated
Cap, Flag
Terminal
POWER
CORD
Jubrication
The BALL BEARINGS in this machine are packed with
grease at the factory They require no further lubrication
Periodically lubricate the cams and shafts in the idler
pulley mechanism with Silicon Spray
For motor lubrication, follow instructions furnished
with motor
23
Loading ...
Loading ...
Loading ...