Loading ...
Loading ...
Loading ...
8 IF THE BELT RUNS OFF TO THE RIGHT:
a Loosen the LOCKING SCREW on the RIGHT
b, Place wrench on the ADJUSTING SCREW on the
right
c Torn switch on and pull the wrench toward you
This will move the belt to the left PUSHING the
wrench will move the belt to the right
d The belt is tracking properly when it is centered
on the DRIVE pulley
IMPORTANT: If you have difficulty tracking
the belt, apply more tension,
9 IF THE BELT RUNS OFF TO THE LEFT:
a Looseo the LOCKING SCREW on time LEFT
b Place wrench on the ADJUSTING SCREW on the
left
c Turn switch on and pull the wrench toward you
This will move the belt to the right PUSHING the
wrench will move time belt to time left
d Time belt is tracking properly when it is centered
on time DRIVE pulley
IMPORTANT: If you have difficulty tracking
the belt, apply more tension.
BELT
LOCKING
SCREW
BELT
MOVING
TO RIGHT
BELT ADJUSTING
SCREW
DRIVE
PULLEY
INSTALLING BELT DUST TRAP
1 Find one 10 - 32 x 9/16" Pan Heed screw and a lock-
washer among the loose parts
©
2 Attach the dust trap .... make sure the top edge is
below the surface of the abrasive belt
PAN HEAD SCREW
AND LOCKWASHER BELT DUST TRAP
17
Loading ...
Loading ...
Loading ...