Loading ...
Loading ...
Loading ...
6 Place the belt onto the motor pulley by rotating the
pulley
7 Snap the belt guard into position
8 Move the motor sideways so that the belt is in the
center of the opening in the top of the base
9 PUSH downward on motor to apply tension to belt
and tighten motor bolt nuts
NOTE: It is only necessary to tension the belt so
that it does not slip while running
10 If you cannot obtain sufficient tension with the motor
pushed all the way down, remove the four motor
bolts and insert them in the LOWER set of holes
ON-OFF SWITCH
WARNING: DON'T CONNECT POWER CORD
TO ELECTRICAL OUTLET IN YOUR SHOP
UNTILYOU ARE READYTO CHECK MOTOR
ROTATION.
The On-Off Switch has a locking feature. THIS FEA-
TURE tS INTENDED TO PREVENT UNAUTHOR-
IZED AND POSSIBLE HAZARDOUS USE BY CHIL-
DREN AND OTHERS
1, Insert key into switch
NOTE: Key is made of yellow plastic
KEY
2 To turn machine on, insert finger under switch lever
and pull end of switch out
13
Loading ...
Loading ...
Loading ...