Loading ...
Loading ...
Loading ...
7
2
3
A
1
Quick Installation
1
Plug the UPS into an outlet
on a dedicated circuit.
Note: After you plug the UPS into a live AC
outlet, the UPS (in “Standby” mode) will
automatically charge its batteries, but will not
supply power to its outlets until it is turned ON.
2
Plug your equipment into
the UPS.*
* Your UPS is designed to support only
electronic equipment. You will overload the
UPS if the total VA ratings for all the
equipment you connect exceeds the UPS’s
Output Capacity. To find your equipment’s VA
ratings, look on its nameplates. If the
equipment is listed in amps, multiply the
number of amps by 120 to determine VA.
(Example: 1 amp × 120 = 120 VA). If you are
unsure if you have overloaded the UPS
outlets, see LOAD icon description in LCD
Interface section under Basic Operation.
3
Turn the UPS ON.
Press and hold the
button
A
for one
second. The alarm will beep once briefly.
Note: UPS system will function properly upon
initial startup, however, maximum runtime for
the unit’s battery will only be accessible after it
has been charged for 24 hours.
Loading ...
Loading ...
Loading ...