Loading ...
Loading ...
Loading ...
11
Basic Operation
“ENTER/MUTE” Button
To toggle settings options while viewing a control menu option, tap this
button. The UPS power failure alarm can also be temporarily silenced by
tapping this button. Once silenced, an alarm will automatically re-sound to
indicate low battery conditions and can no longer be silenced.*
• Can be used in conjunction with the “ON/OFF” button to cancel the “OFF”
function. See “ON/OFF Button” instructions above.
• Can be used in conjunction with the “ENTER/MUTE” button to restore the
LCD to Factory Mode. See “ON/OFF Button” instructions.
Note: Alarm-free silent operation is available by setting the alarm to disable (see
CONTROL MENU OPTIONS / ALARM ENABLE-DISABLE section).
Battery Capacity: This will be active in all “Display” modes, but is not
shown in “Control” modes.
AC Input: This indicates that the unit is running in Line Mode and supplying
AC power to equipment connected to the output.
Battery Input: This will flash to indicate that the UPS is not receiving AC
input and is running in inverter mode. The Battery Input icon is also used in
conjunction with the EVENTS icon to indicate On Battery events.
Replace Battery Icon: In the event that UPS batteries expire and require
replacement, this icon and the warning icon will flash. This icon will also
flash after a failed UPS self-test (see the BASIC OPERATION / CONTROL
MENU OPTIONS / SELF-TEST section for more information).
Warning: This will flash to let the user know that there is a warning condition
and immediate action must be taken:
1. For Replace Battery: Replace Battery and Warning icons flash during any
normal “Display” mode.
2. For Overload: Load, Warning and Load Percentage icons will flash, the
alarm will sound repeatedly and the LCD screen will switch from the user-
selected display mode to Load Percentage. Overload indication is
available in both AC and battery modes.
CAUTION! Any overload condition that is not correct by the user
immediately may cause the UPS to shut down and cease supplying
output power in the event of a blackout or brownout.
EVENTS Icon: Displayed in conjunction with the AVR icon and BATT icons
to indicate the number of On Battery or AVR events that have occurred.
Alarm Off: Indicates that the alarm is disabled.
Loading ...
Loading ...
Loading ...