Loading ...
Loading ...
Loading ...
H. Startup
WARNING
All parts are factory-adjusted. Improper adjustments may adversely affect safety,
performance, component life, and warranty coverage.
NOTICE
• If the appliance is turned off, wait for at least 3 minutes before restarting the
appliance to prevent damage to the compressor.
• To prevent damage to the water pump, do not leave the control switch in the
“WASH” position for extended periods of time when the water tank is empty.
• At startup, conrm that all internal and external connections are free of leaks.
1) Open the water supply line shut-off valve(s).
2) Remove the air lter.
3) Make sure the control switch is in the “OFF” position. Plug the appliance into the
electrical outlet. WARNING! To reduce the risk of electric shock, do not touch the
control switch or plug with damp hands. If you have to slide the appliance back
for a built-in installation, make sure you do not damage or pinch the water supply
line, drain line, or power cord.
4) Move the control switch to the “ICE” position.
5) Allow the appliance to operate for 10 minutes.
6) Move the control switch to the “WASH” position.
7) Allow the appliance to operate for 5 minutes.
8) Move the control switch to the
“OFF” position, then unplug the
appliance from the electrical
outlet.
9) Open the door.
10) Disconnect the silicone hose to
drain the water. See Fig. 7.
11) Reconnect the silicone hose back
in its correct position after all of
the water has drained.
12) Clean the ice storage bin using a
neutral cleaner. Rinse thoroughly
after cleaning.
13) Make sure the control switch is
in the “OFF” position. Plug the
appliance into the electrical outlet.
Fig. 7
Cube Guide
Water Tank
Silicone Hose
(Connect/disconnect
where indicated by
arrow)
Overow Pipe
(Disconnect from tank
bottom)
Ice Storage Bin
21
Loading ...
Loading ...
Loading ...