Loading ...
Loading ...
Loading ...
1. Icemaker
Icemaker Water
Supply Inlet
Minimum Icemaker
Water Supply Line Size
Icemaker Drain
Outlet
Minimum Icemaker
Drain Line Size
1/2" Female Pipe
Thread (FPT)
1/4" Nominal ID Copper
Water Tubing or Equivalent
3/4" Female Pipe
Thread (FPT)
3/4" Nominal ID Hard
Pipe or Equivalent
• An icemaker water supply line shut-off valve and drain valve must be installed.
• Be sure there is sufficient extra water supply line and drain line for the appliance to be
pulled out for service.
Fig. 4
KM-81BAJ, KM-116BAJ, KM-161BAJ
2-inch (5-cm)
air gap
Drain
Floor
Icemaker Water Supply
Inlet 1/2” FPT
Icemaker Drain Outlet
3/4” FPT
Shut-o Valve
To approved
oor drain
Drain Valve
1/4” fall
per foot
Minimum 3/4” Nominal ID
Hard Pipe or Equivalent
Minimum 1/4” Nominal ID Copper
Water Tubing or Equivalent
Trap
Be sure there is sucient
extra water supply line and
drain line for the appliance
to be pulled out for service.
Separate piping to approved
drain. Leave a 2-inch (5-cm)
vertical air gap between the
end of each pipe and the
drain.
Vent Tube
17
Loading ...
Loading ...
Loading ...