Loading ...
Loading ...
Loading ...
D. Setup
NOTICE
• Do not place more than 33 lb. (15 kg) on the top panel.
• Do not use the frame to life the appliance. Lift the appliance from the base.
• Handle the appliance carefully to avoid damaging the exterior.
1) Unpack the appliance, and remove all shipping cartons, tape, and packing material
before operating the unit.
2) Position the appliance in its permanent location.
3) Level the appliance in both the left-to-right and the front-to-rear directions (when
installed with or without legs). See Fig. 2.
4) If mounting at to a counter, seal the perimeter where the appliance contacts the
counter with approved caulk compound in a smooth and easily cleanable manner.
5) If installing the unit with legs on the bottom, use the four accessory legs adjustable from
6” (15.2 cm) to 7” (17.8 cm). Screw the legs tightly into the tapped holes in the base (see
Fig. 3).
Fig. 2
Tapped Hole
(Leg Mounting)
Base
Adjustable Leg
Fig. 3
14
Loading ...
Loading ...
Loading ...