Loading ...
Loading ...
Loading ...
B. Checks Before Installation
NOTICE
• Remove all shipping cartons, tape, and packing material. If any are left in the
appliance, it will not work properly.
• Remove the shipping tape holding the door and separator. See Fig. 1.
• Visually inspect the exterior of the shipping container and immediately report any damage
to the carrier. Upon opening the container, any concealed damage should also be
immediately reported to the carrier.
• Remove the panels to prevent damage when installing the appliance. See “II. C. How to
Remove Panels.”
• Remove the package containing the accessories.
• Remove the protective plastic lm from the panels. If the appliance is exposed to the sun
or to heat, remove the lm after the appliance cools.
• Check that refrigerant lines do not rub or touch lines or other surfaces, and that the fan
blade (if applicable) turns freely.
• Check that the compressor is snug on all mounting pads.
• See the nameplate on the upper part of the left side panel, and check that your voltage
supplied corresponds with the voltage specied on the nameplate.
12
Loading ...
Loading ...
Loading ...