Loading ...
Loading ...
Loading ...
To Remove and Replace Oven Door
1. Open the door to the fully opened position.
2. Pull up the lock located on both hinge supports and engage it in the hinge levers. You may
have to apply a little downward pressure on the door to pull the locks fully over the hooks.
3. Grab the door by the sides, pull the bottom of the door up and toward you to disengage the
hinge supports. Keep pulling the bottom of the door toward you while rotating the top of the
door toward the range to completely disengage the hinge levers.
4. To replace the door, reverse the door removal steps.
Make sure the hinge supports are fully engaged before unlocking the hinge levers.
The door is heavy. After removing door, lay it flat on the floor with the inside of
the door facing down.
General
Cleaning
FEATURE OVERVIEW
• To Remove and Replace
Oven Door
• Removable Outer Door
Glass Panel
in normal
position
Lock engaged
for door removal
HINGE SLOT Door
removed from the range
Removable Outer Door Glass Panel
Applicable only to models with an external glass panel not held with a frame. This design allows
you to clean the inside face of the exterior door panel as well as the hidden face of the door
inner glass.
To Remove the External Door Glass Panel:
1. Remove the door as shown above and lay the door flat.
2. Using a screwdriver, remove the 5 screws fastening the metal glass support rail to the
underside of the door. Remove the support rail.
3. Grasp both sides of the glass panel and slowly pull it out of the door upper molding. Lay the
glassflat.
To Replace the External Door Glass Panel:
1. Grasp the sides of the glass panel and carefully insert the glass into the door top moulding.
2. Replacethe support rail and the 5 locking screws.
3. Replacethe door onto the range.
Handle the glass panel with care. When dropped on a corner, the glass panel
may shatter.
2
0
Z
35
Loading ...
Loading ...
Loading ...