Loading ...
Loading ...
Loading ...
Table 4-3 Hub parameter description
Parameter Description
User Manager
You can add, modify, or delete keypad users when it is disarmed.
●
Adding Users : Tap
to add a user. Enter your username,
passcode, and duress passcode, and then select arming and
disarming permissions for the room.
Passcode and duress code must be 4 to 6 digits.
Duress passcode is optional.
Up to 32 users can be created. The rst created user is the admin
user by default. All the permissions are available to them.
●
Deleting User : Select the user, and then swipe left to delete the
user.
The admin user must be the last to be deleted.
●
Modifying User's Information : Tap the user you need to edit, and
then you can modify user's information, including username,
passcode, duress code, arming and disarming permission on the user
information page.
●
Adding Card : Tap
on the upper-right corner of the user
information page to add card for the user. Press any key to wake up
the keypad, and then place the card near the card swiping area of the
keypad to enter to the linking process within 30 seconds.
If the card information is successfully recognized, the card ID will be
displayed on the user information page, and then the keypad will
beep once. After you save the congurations, the card will have the
user's permissions.
Up to 8 cards can be linked to a user.
●
Deleting Card : Select the card, and then swipe left to delete the
card.
Global Arming/
Disarming
Arm or disarm all the detectors in all the areas with one tap.
Schedule Arming/
Disarming
Arm or disarm the areas by schedule.
●
Area : Select the area in which the hub operates.
●
Command setting : Select an armed mode as needed by tapping
Home, Away, or Disarm.
●
Time : Select the time period in which the hub operates.
●
Repeat : Copy the arming or disarming schedule.
●
Force Armed : You can arm the system when errors happen in zones.
Ringtone Setting The ringtone when entering or exiting the arming mode.
User's Manual
30
Loading ...
Loading ...
Loading ...