Loading ...
Loading ...
Loading ...
6
ENG
Gas Connection
For LPG Connection
Electrical connection scheme
1. Connect your appliance to gas cock from the
shortest way and in a manner to prevent any
leakage. For safety, the hose used should be
maximum 125 cm and minimum 40 cm.
2. While making gas leakage control; never use
lighter, match, glowing cigarette or similar
inflammable matter.
3. Apply soap bubble on connection point. If any
leak/leakage exists, foaming will occur on soaped
region.
4. If the cooktop is to be mounted on a cabinet or
openable drawer, a heat protection panel having
15 mm minimum opening should be mounted
under the cooktop.
Get electrical connection of your appliance done to authorized person in line with the following scheme.
L1
~
WARNING!
Before starting any work related with gas installation, turn off gas supply. Risk of explosion.
Main gas pipe
Gasket
Hose inlet connector
Metal clamp
Lpg connection hose
For LPG (cylinder) connection, affix metal clamp on the hose
coming from LPG cylinder. Affix an edge of the hose on hose
inlet connector behind the appliance by pushing to end
through heating the hose in boiled water. Afterward, bring
the clamp towards end section of the hose and tighten it with
screwdriver. The gasket and hose inlet connector required
for connection is as the picture shown below.
NOTE
The regulator to be affixed on LPG cylinder should have 300
mmSS feature.
Loading ...
Loading ...
Loading ...