Loading ...
Loading ...
Loading ...
17
ENG
Before starting to maintenance or cleaning, firstly unplug the plug supplying electricity to cooktop and turn down
gas valve. If cooktop is hot, wait for cooling down.
1. For the purpose that your cooktop has long and economic life, regular cleaning and maintenance should be
performed on your cooktop.
2. Do not clean your cooktop with scratching tools such as bristle brush, wire wool or knife. Do not use abrasive,
scratching, acid materials or detergent.
3. Following mopping parts of your cooktop with soapy cloth, rinse it, later rinse well with a soft cloth.
4. Clean glass surfaces with special glass cleaning substances. As scratching of glass surfaces leads to breaking,
while cleaning glass surfaces, do not use abrasive cleaners or sharp metal scrapers.
5. Do not clean your cooktop with steamy cleaners.
6. Clean channels and lids of cooktop zones with soapy water and clean gas channels with a brush.
7. In the course of cleaning your cooktop, never use flammable materials such as acid, thinner and gas.
8. Do not wash plastic and aluminium parts of your cooktop in dishwasher.
9. Clean vinegar, lemon, salt, coke and similar acid and alkaline containing substances poured on your cooktop
immediately.
10. In time, cooktop buttons turns hard or never turn any more, in such circumstances, it may be necessary that
buttons are changed. The change should only be done by authorized service.
MAINTENANCE AND CLEANING
You may solve the problems you may encounter with your product by checking the following points before calling
the technical service.
In case you experience a problem about the cooker, first check the table below and try out the suggestions.
TROUBLESHOOTING
Check Points
Problem Possible cause Remedy
No Ignition.
No sparks. Check power supply.
Cooker cover is not fitted properly. Fit the cover properly.
Gas supply is closed. Fully open gas supply.
Not Proper Ignition.
Gas supply not fully open. Fully open gas supply.
Cooker cover is not fitted properly. Fit the cover properly.
Ignition plug is clogged with foreign
materials.
Wipe off foreign materials with a cloth.
Hobs are wet. Carefully dry the hobs.
Flame spreader holes are clogged. Clean the flame spreader.
Noise coming when
burning or during
ignition.
Cooker cover is not fitted properly. Fit the cover properly.
Flame turns off during
operation.
Flame observer device is clogged by
foreign material.
Clean flame observer device.
Overflow food turns off the flame.
Switch off the hob. Wait for one minute
and ignite again.
A strong air flow turns off the flame.
Please check related hob and check
the cooking area for air flows, for
example, from an open window. Wait
for one minute and ignite again.
Loading ...
Loading ...
Loading ...