Loading ...
Loading ...
Loading ...
24
4.3 Start Charging
1. Remove the connector from the holster.
2. Plug the connector into your EV charging port.
3. Choose one of the following ways to start a charge session:
—
If the Auto Start function is enabled in the Autel Charge app, the charger will automatically start
charging once the connector is properly connected.
—
Use the Autel Charge app by tapping Start on the Charge screen.
—
If you have set a charging schedule in the Autel Charge app, the charger will initiate a charge session
automatically as scheduled.
—
If the RFID function is enabled, tap your RFID card on the RFID reader.
NOTE
Ensure your EV is charging. The charging LED on the charger should be flashing green. If you suspect the
vehicle is not charging properly, try reconnecting the charging cable or contact customer support.
4.4 Stop Charging
NOTE
If you disconnect the EV charging cable during the charge session, the charger automatically disconnects
the power supply. This stops all charging operations.
When your vehicle is fully charged, the charger will automatically disconnect the power supply.
1. To stop charging, you can choose either of the following two ways:
Wait for the charge session to end and no further actions are required in the case of scheduled
charging or Auto Start.
—
The charging LED will illuminate solid green.
—
The Autel Charge app displays that your EV is fully charged.
End the charge session by tapping Stop on the Charge screen. Or, if the RFID function is enabled,
tap the RFID card on the RFID reader again.
2. Unplug the connector from your EV and return it to the holster.
Loading ...
Loading ...
Loading ...