Loading ...
Loading ...
Loading ...
13
STEP 3
1. Drill two 5/16" holes and insert two 5/16"
diameter wall anchors into the lower
mounting holes.
2. Attach the wall dock to the mounting
location by inserting two M6 x 50 screws
(B) into the lower mounting holes.
Tighten the screws using the PH2
screwdriver (not included in the package).
STEP 4
Attach the charger to the wall dock by
inserting the mounting screws (D) on the back
of the charger into the two upper mounting
holes (C). Slide the charger downwards to
engage the screws.
STEP 5
Screw the M5 x 12 screw (E) into the hole at
the bottom of the charger and tighten the
screw to secure the charger using the T25 Torx
screwdriver.
Loading ...
Loading ...
Loading ...