Loading ...
Loading ...
Loading ...
15
Mounting the Wall Dock
1. Drill two 5/16" holes and insert two 5/16"
diameter wall anchors into the lower
mounting holes.
2. Attach the wall dock to the mounting
location by inserting two M6 x 50 screws (B)
into the lower mounting holes. Tighten the
screws using the type PH2 screwdriver (not
included in the package).
Removing the Covers
1. Remove the two screws (C) at the bottom of
the charger with the T10 Torx screwdriver.
Then remove the faceplate from the middle
of the clasp (D). Set them aside.
2. Unscrew the eight screws to remove the
maintenance cover (E). Set them aside.
Loading ...
Loading ...
Loading ...