Loading ...
Loading ...
Loading ...
14
Chapter 3 Quick application guide
Warning:
⚫ Do not measure the charged capacitor, or it may cause damage to the
instrument.
⚫ In case of measurement of on-board devices, make sure the power is turned
off. The active circuit cannot be measured directly.
⚫ When used in the dusty environment, the instrument is easy to gather dirt,
so it should be cleaned periodically to protect the test port to prevent the
dust from entering the instrument. The accumulation of dust will be
conductive and affect the use of the instrument.
⚫ Do not place the instrument directly in the environments with explosives,
direct sunlight and excessive heat.
Reminder: To achieve the proper measurement accuracy, refer to the
"correction function" section for open and short circuit correction before the
measurement. The test fixture can be rubber plug - alligator clip (see figure), or
the component can be directly inserted into the test notch. The rubber plug -
alligator clips are mainly used in the following examples.
Loading ...
Loading ...
Loading ...