Loading ...
Loading ...
Loading ...
13
CONTROL PANEL
BUTTONS
A. TIMER BUTTON
Program a time (from 1 hour to 24 hours) for the air conditioner to turn Off or On. When a Time Delay is programmed,
the Timer indicator light will light up.
While the air conditioner is operating:
1. Press the Timer button.
2. Press the Up/Down arrow buttons to select the number of hours you want the air conditioner to continue to
operate before turning Off.
While the air conditioner is off:
1. Press the Timer button.
2. Press the Up/Down arrow buttons to select the number of hours you want the air conditioner to remain off before
turning On.
NOTE: Wait approximately 5 seconds for the Turn-On time to be saved.
To cancel the timer:
• Press the Timer button once, the hours remaining will flash; press the timer button again and the timer will be
canceled.
B. FAN SPEED BUTTON
The fan speed can be adjusted from Low, Medium, to High speed when the air conditioner is in operation.
NOTE: The fan speed cannot be adjusted when the unit is in Dehum mode.
Press the Fan Speed button to switch between the two speeds. The corresponding fan speed indicator will light
up.
C. CONTROL PANEL DISPLAY
Display the Set Temperature in degrees Fahrenheit or degrees Celsius, or the hours remaining in a Time Delay. The
corresponding indicator light will light up.
D. UP AND DOWN ARROW BUTTONS
Adjust the Temperature or Hour in Time Delay.
To Set the Temperature:
The temperature can be set between 62
℉
and 86
℉
(17
℃
and 30
℃
) when the air conditioner is in Cool mode.
1. Press the Mode button until the Cool mode is selected.
2. Press the Up Arrow or Down Arrow buttons to select the temperature.
NOTE: The temperature cannot be set when the air conditioner is in either Fan or Dehum mode.
NOTE: The Up Arrow and Down Arrow buttons, when pressed at the same time, allow you to select the the
temperature unit between
℃
and
℉
on the display. The corresponding indicator will light up.
Loading ...
Loading ...
Loading ...