Loading ...
Loading ...
Loading ...
8
1. Control Panel
2. Air Discharge Louvers
3. Caster
4. Remote Control Holder
5. Side Handle
6. Power Cord Storage
7. Air Filter
8. Center Drain Cap
9. Lower Drain Cap
10. Remote Control
11. Round Connector
12. Exhaust Hose
13. Adapter
14. Window Kits
15. Window Kits Screw
(
butterfly nut)
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the required tools and parts before starting the installation.
TOOLS NEEDED
•Flat-blade Screwdriver
•Phillips Screwdriver
LOCATION REQUIREMENTS
Place the air conditioner on a flat and level surface in a location that is at least 20 inches from any wall.
NOTE: A minimum clearance of 20 inches from the air conditioner to the wall must be maintained to ensure proper airflow.
Maintain a minimum 20-inch clearance around the air conditioner to not block the airflow.
Keep the air conditioner free of any obstructions such as drapes, curtains, blinds, etc.
The exhaust hose should be free of any obstructions.
Do not place the air conditioner on an unstable or raised surface because it could fall and cause damage or injury.
Do not place the air conditioner in direct sunlight or near a heat source such as baseboard heaters, stoves, etc.
Loading ...
Loading ...
Loading ...