Loading ...
Loading ...
Loading ...
Installation Instructions
-&WARNING!
INSTALLATIONSAFETY
INSTRUCTIONS
Read these instructions completelg and
carefullg.
Improper installation, adjustment, alteration,
service or maintenance can cause injurg or
propertg damage. Refer to this manual. For
assistance or additional information, consult a
qualified installer, service agencg, manufacturer
(dealer} or the gas supplier.
Never reuse old flexible connectors. The use
of old flexible connectors can cause gas leaks
and personal injurg. Alwugs use NEW flexible
connectors when installing u gas appliance.
IM PORTANT- Remove ellpeckingmateriel
and literaturefrom oven beforeconnectinggas and
electrical supplg to range.
CAUTION - Do not attempt to operate the
oven of this range during o power failure (Electric
Ignition models onlg).
• Hove gour range installed bg a qualified installer.
• Your range must be electricallg grounded
in accordance with local codes or, in the absence
of local codes, in accordance with the Notional
Electrical Code (ANSIiNFPA 70, latest edition).
In Canada, electrical grounding must be in
accordance with the current CSA C22.! Canadian
Electrical Code Port ! end/or local codes.
See Efectricof Connections in this section.
• Before installing gour range on linoleum or ang
other sgnthetic floor covering, make sure the
floor covering con withstand !80°F without
shrinking, warping or discoloring. Do not install
the range over carpeting unless a sheet of 1/4"
thick pigweed or similar insulator is placed
between the range and carpeting.
• Make sure the well coverings around the range
con withstand heat generated bg the range up
to 200°R
Avoid placing cabinets above the range.
To reduce the hazard caused bg reaching over
the open flames of operating burners, install a
ventilation hood over the range that projects
forward at least 5" begond the front of the
cabinets.
The ventilating hood must be constructed of
sheet metal not less than 0.0122" thick. Install
above the cooktop with a clearance of not less
then 1//4" between the hood and the underside
of the combustible material or metal cabinet.
The hood must be at least as wide as the
appliance and centered over the appliance.
Clearance between the cooking surface and the
ventilation hood surface MUST NEVER BE LESS
THAN 24 INCHES.
EXCEPTION: Installation of o listed microwave
oven or cooking appliance over the cooktop shall
conform to the installation instructions packed with
that appliance.
• If cabinets ore placed above the range, allow a
minimum clearance of 30" between the cooking
surface and the bottom of unprotected cabinets.
• If a 30" clearance between cooking surface and
overhead combustible material or metal cabinets
cannot be maintained, protect the underside of
the cabinets above the cooktop with not less then
1/4" insulating millboard covered with sheet metal
not less than 0.0122" thick. Clearance between
the cooking surface end protected cabinets MUST
NEVER BE LESSTHAN 24 INCHES.
The vertical distance from the plane of the
cooking surface to the bottom of adjacent
overhead cabinets extending closer than 1" to
the plane of the range sides must not be less
than 18". (See the Dimensions and Clearances
illustration in this section.)
CAUTION -Items ofinterestto children
should not be storedincabinetsabove a range
or on the backsplashofa range-children
climbingon the range toreach itemscould
be seriouslg injured.
29
Loading ...
Loading ...
Loading ...