Loading ...
Loading ...
Loading ...
Unit
Select the amplitude display unit for the current channel. The available units are
volts denoted by “V” and amps shown as “A”. When the unit is changed, the
unit displayed in the channel label will change accordingly.
1. Press CH1 button on the front panel to enter the CH1 function menu.
2. Press the Next Page softkey to enter the second page of the CH1 function
menu.
3. Press the Unit softkey to select the desired unit V or A.
The default setup is V.
Deskew
Deskew allows you to add or subtract a mathematical time delay to a channels
time data. This can be helpful in coordinating signals that may have different cable
lengths or other causes of time skew between channels.
The valid deskew range of each analog channel is ±100 ns.
1. Press CH1 button on the front panel to enter the CH1 function menu.
2. Press the Next Page softkey to enter the second page of the CH1 function
menu.
3. Press the Deskew softkey. Then turn the Universal Knob to change deskew.
Invert
When Invert is set to On, the voltage values of the displayed waveform are inverted.
Invert affects how a channel is displayed and it keeps the trigger settings.
Inverting a channel also changes the result of any math function selected and
measure function.
1. Press CH1 button on the front panel to enter the CH1 function menu.
2. Press the Next Page softkey to enter the second page of the CH1 function
menu.
3. Press the Invert softkey to turn on or off the invert display.
Loading ...
Loading ...
Loading ...